| 1991 |
October |
Program:
Sal Marino of Constantines; The use and care of basic hand tools
and Joinery: Gluing and clamping
Field
Trip: Hanford Mills - 1860's water powered saw mill
While
it is important to develop stimulating programs the President
does not believe they are the primary functions of the club.
Develop a list of people's skills and interest.
The
board finalized a constitution which will be presented to members
and an election of officers. |
|
| November |
Program:
Harry Wicks - Simple Finishing Techniques
December
meeting will be the 1st Annual Toys for Tots Exhibition. Goal of
50 toys.
|
|
| December |
Program:
First Toys for Tots Program - Prizes awarded
Program:
Video of RoboCarve - Wood Duplicator
Seminar:
Frank Klauss - For February 1992 - Proper woodworking and prep
and finishing new woods.
|
|
| 1992
|
January |
Program:
Jim Forest - Table Saw magic
Board
Members are permitted to attend special seminars without charge
if it does not cost the membership any additional funds, nor a
financial loss to the club.
|
|
| February |
Program:
Dave Hahn - Shopsmith Demonstration
Field
Trip: Sturbridge Village May 2 (Later cancelled)
|
|
| March |
Program:
Steve Stout and Don Breinlinger - Designing and building
decorative boxes and bandsaw baskets.
Field
Trip: Frank Klausz Workshop - Date to be announced
|
|
| April |
Program:
Harold Fountain - Designing and Building Custom Staircases
Field
Trip: Sturbridge Village May 2 (Later cancelled) Because of the
amount of work involved and poor member response, the Board has
decided not to have any more future trips.
|
|
| May |
Program:
Brian Corbly - Amana Tools
Picnic
and Annual Woodworking Show June 24
|
|
| June |
Program:
Picnic and Annual Woodworking Show AND Lathe Demonstration
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| September |
Program:
Rev Garrett Long - Butcher Block Cabinetry.
Dues
raised + $5.00 to $15.00. $5.00 to cover cost of newsletter
reproduction and mailing.
|
|
| October |
Program:
Sal Marino - Keeping your tools Sharp
Field
Trip: Frank Klausz - November 7
Woodworking
World - LIW Show at Hofstra University in February. LIWC given
two booths to participate
|
|
| November |
Program:
Tony Scotti - Ryobi Power Tool Demonstration
|
|
| December |
Program:
Christmas Party - Toys for Tots Drive
|
|
| 1993
|
January |
Program:
Hank Koelmel
Ryobi
Laminate router disappeared
|
|
| February |
Program:
Everlast Tools
Club
reaches 100 members
|
|
| |
Newsletter
Not Available
|
|
| April |
Program:
Schindler Chance Hardwoods and Jay Seligman talks about
hardware.
April
23 and 2 Mid Atlantic Woodworking and Furniture Supply Show.
|
|
| May |
Program:
Open Forum, Jigs and Fixtures
Program
Committee formed
|
|
| June |
Program:
Annual BBQ
Suggestion
for a "Super Raffle" $300-500 prize once a year.
Suggestion
to offer T-Shirts with Logo
Suggestion
to bring in a Celebrity Woodworker
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| September |
Program:
Stanley Tools
Board
Decisions:
Formalize
LIWC into a not-for-profit corporation
Provide
more books and videos for library
Implement
"Super Raffle"
LIWC
Clothing
Saturday
Workshop Bruce Hoadley -
Understanding
Wood
|
|
| October |
Program:
Mario Rodriguez - Windsor Chair design
Everlast
Saw Blade Factory Tour - 11/20/93
|
|
| November |
Program:
Bruce Hoadley Understanding Wood Cancelled - poor attendance
|
|
| December |
Christmas
Party - Toys for Tots
Open
Forum - At each meeting there will be a period of time for this.
|
|
| |
|
|
|
| 1994
|
January |
Program:
Tom Vatti - how to cut moldings, hang paneling and create custom
ceiling designs.
Toys
for Tots generated 202 toys
|
|
| February |
Meeting
Cancelled - SNOW!
Board
of Directors Meeting:
The
Board meets every month
Club
Treasurer will prepare and publish income and Expense report
semiannually in the newsletter.
The
club will apply for "Not for Profit" status.
Solicit
a Secretary
Prepare
a budget for Program Committee
Regularly
solicit feedback from members via a simple questionnaire.
Solicit
members for information on Newsletter Contributions
Commence
"Special Interest Groups"
Add
Dave Chance to Board based on his contributions, efforts and
support
Institute
a Suggestion Box
|
|
| March |
Program:
Sal Marino - Water Based Finishes
|
|
| April |
Program:
Allen Fitchet - Veneering
Bob
Wessmiller - Resigning, moving
John
DeFilippi - Resigning, business reasons
Seminars:
Sal Marino and Dave Chance will begin a series of 10, 3 hour
seminars throughout the Summer on Wednesday evenings.
|
|
| May |
Program:
Peter McKenna - Shaker Furniture
Board
meeting:
At
June picnic/wood show - no judging will occur.
Club
Secretary (John) resigned.
Establish
a nominating committee.
|
|
| June |
Looking
for members to fill vacant board positions
|
|
| |
No
Woodrack Available
Annual
BBQ and Woodworking Show - (There WAS judging)
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| September |
Program:
Special Interest Discussion Groups - Table saws; Routers; Incra
Jig; Scroll Saws.
|
|
| October |
Program:
Roger Schroeder - Victorian Style Desk
|
|
| November |
Program:
Allan Fitchett - Marquetry
New
Officers and Board Committee
President:
Jeff Berson
Vice
President: Brian Haywood
Treasurer
and Membership Chairman: Joe Pascussi
Assistant
Treasurer: (Vacant)
Social
Committee: Mike Bonchonsky
Resource
Committee: Chair - Ken LeGrow
Program
Committee: Chair-Howard Whitman
|
|
| December |
Program:
Toys for Tots event and Holiday party
Assistant
Treasurer Joe Irving (nominated)
Membership
Committee - Bob Urso
|
|
| |
|
|
|
| 1995
|
January |
Program:
Ray Mignone - Building an award winning table
Board
Notes:
Membership
cards will be created and distributed
Brian
Haywood put together a rough draft for the Club's constitution.
The
Library will purchase new videos.
Restart
of Monthly Raffle.
|
|
| February |
Program:
Finishing Techniques
Thanks
to Dave Chance for providing his store and shop location RENT
FREE for the LIWC.
|
|
| March |
Program:
Stuart Ain - Vacuum pump
Review
of the By-Laws by the Board.
|
|
| April |
Program:
Jim Diamond - Turning a vase
LIW
New Home: Smithtown (Brush) Barn
Woodworking
Classes - Frank Pollaro will hold weekend classes on veneering at
his workshop.
|
|
| May |
Nomination
of Officers
|
|
| |
(No
Woodrack Available)
Officers
elected:
President
- Bill Hermanek
VP
and Program Chairman: Jackson Lowell
Treasurer:
Joe Pascucci
Librarian:
Steve Longo (Assoc Librarian Ken LeGrow)
Editor
of Wood Rack: Jim Cosgrove
Trustee:
Brian Haywood
Trustee
and Assoc Editor of Woodrack: Roger Schroeder
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| September |
Program:
Aly Kahn of Dynamite Tools
|
|
| October |
Program:
Tom Petry Guitar maker
|
|
| November |
Program:
Greg Krockta - Hand Carved Signs
Road
Trip - Roberts Plywood
|
|
| December |
Toys
for Tots
Scroll
Saw Workshop December 9
|
|
| 1996
|
January |
Program:
Christopher Bender - Windsor furniture
|
|
| February |
Program:
Jigs, Fixtures and homemade Tools
|
|
| March |
Program:
DeWalt presentation at Home Depot.
Report
on HVLP sprayers by Paul Cappy
|
|
| April |
Program:
Les Swann, Tom Petry and Graham Kelly will present a round table
discussion on sharpening woodworking tools.
Two
Router workshops planned.
|
|
| May |
Program:
Frank Pollaro - Furniture maker
|
|
| June |
Annual
Woodworking Contest and BBQ
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| September |
Program:
Round Robin format.
|
|
| October |
Program:
Chuck Grodski, Custom Birdhouse Builder
FIRST
Annual Membership Exhibition was held.
|
|
| November |
Program:
Ken Dubie, Jet Manufacturing.
|
|
| December |
Program:
Frank Klausz, Master Furniture maker
|
|
| 1997
|
|
No
Meeting (New Years Day)
|
|
| |
Program:
Norm Roberts - Roberts Plywood
|
|
| March |
Program:
Peter McCusker of Turbinaire Inc. - HVLP systems.
|
|
| April |
Program:
Home depot. Dewalt presentation.
Membership
at 205!
|
|
| May |
Program:
Pat Leach and Peter Taran of Independence Tool Co - Hand saws
|
|
| June |
Program:
Annual
Picnic and project contest
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| September |
Program:
Vacuum clamping and veneering.
|
|
| October |
Program:
Charlie Morehouse - furniture restoration
|
|
| November |
DeWalt
informal discussion group at the Hampton Inn
|
|
| December |
Program:
Frank Klausz - Frames and Drawers
Toys
for Tots - 235 toys
Ian
Kirby workshop Dec 13
|
|
| 1998
|
January |
Program:
Scroll Saw Demo by DeWalt
Ian
Kirby workshop January 10
|
|
| February |
Program:
Alan Rosenberg - J&A Lumber
Wood
Notes - Ian Kirby (Part 1 of 2)
|
|
| March |
Program:
Sal Marino - Finishing
Wood
Notes - Ian Kirby (Part 2 of 2)
Letter
from Wisconsin Woodworkers Guild - sharing experiences
|
|
| April |
Program:
(Annual) DeWalt Tools @ Home Depot
|
|
| May |
Program:
Turning Long Island Woodturners -Turning.
Roberts
Plywood Field Trip
|
|
| June |
Program:
Annual
BBQ and Woodworking Contest
|
|
| |
NO
MEETING - SUMMER RECESS
July
27 Veneering Workshop in NJ w/Frank Pollaro
|
|
| |
NO
MEETING - SUMMER RECESS
Seminar:
Aug 5 - Gabe Jean - Shaker Furniture
Seminar:
Aug. 15 - Ian Kirby Seminar - Table saw
|
|
| September |
Program:
Sal Marino - Inlays
Seminar:
Sept 26 - Sal Marino - Finishing
|
|
| October |
Garage
Sale suggested
Third
Annual Exhibition at the Brush Barn
Library
guidelines established
|
|
| November |
Program:
Steve Costello - Veneering
Sal
Marino volunteered to build a web page for LIW.
|
|
| December |
Program:
Bill Boxer Spray Painting using HVL
Toys
for Tots
Dec
12-13 - Ernie Conover Seminar
|
|
| 1999 |
January 99 |
Discussion
on last month's Toys for Tots.
|
|
| February 99 |
Program:
Gene McKenna K&G Power Equipment - Compressed air in the
workshop.
Round
Robin
Name
Tag Contest announced
|
|
| March 99 |
Program:
Doug Kenny of South Dennis MA, wood collecting and his scale
model trains and fire engines.
Club's
exhibition will be at Sports Plus
Web
Page developed by Larry Russo
|
|
| April 99 |
Program:
Mario Rodriguez - Soup up your Dovetail Saw
Seminar:
April 24 Mario Rodgiquez - Queen Anne Mirror
|
|
| May 99 |
Program:
Constantine's and FISCH Precision Tools
Name
Tag Contest Winner Alain Tiercy
|
|
| |
No
Woodrack Available
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| September 99 |
Program:
Sal Marino - Sharpening
|
|
| October 99 |
Program:
Nick Basile - Delta
Seminar:
Sal Marino - Sharpening
|
|
| November 99 |
Program:
DeWalt - Contractors Saw and Table construction by Steve
Costelly, Gabe Jean and Charlie James.
|
|
| December 99 |
Program:
Toys
for Tots Holiday get together
|
|
| 2000 |
January 00_ |
Review
of Toys for Tots program
LIWC
Profile Ken Lofink
|
|
| February 00 |
Program:
Show and Tell- Handmade walnut plane and cutting dovetails by
hand; quick release chuck for a router; toy safety; raised panel
doors; etching; wood finishing; toy wheels; jigs and techniques
for thickness planers; marquetry; scroll saw demo; spindle
turning.
Ian
Kirby Website (classes)
|
|
| March 00 |
Program:
Aime Fraser Woodworker and Author "Bandsaws"
Website
now up and running and being updated by Kevin Hanson.
|
|
| April 00 |
Program:
John Gray - Woodworker from JG Stickley Co "Working with
Wood, Not against it".
Seminar:
John Gray - Arts and Crafts furniture
|
|
| May 00 |
Program:
Mario Rodriguez "Planing Difficult Woods"
Tool
Review: Vortex Brad Point Bits
Member
Profile: Armor Products
|
|
| June 00 |
Program:
Annual
Picnic
|
|
| |
Program:
Round
Robin - No Woodrack Available
|
|
| August 00 |
Program:
Show and Tell
|
|
| September 00 |
Program:
Charlie Morehouse - Wood finishing on Carving.
The
2000 show showed a profit of $3400.00
Shop
Reviews - Owen Brady, Brian Monks, Chris Lusardi, Steve Costello
|
|
| October 00 |
Program:
Steve Meltzer from Constantine's. Relief carvings.
Seminar:
Strother Purdy - Practical Furniture Design
|
|
| November 00 |
Program:
Struther Purdy - Elements of good design in furniture
Shop
Review - Paul Decker
|
|
| December 00 |
Program:
Ian Kirby - Concept of Design.
Election
of Officers.
Woodrack
now available via electronic delivery.
|
|
| 2001
|
January 01 |
Program:
Member Hands On.
Seminar:
Carving Workshop
Shop
Review Ed and Flo Leitgeb
|
|
| February 01 |
LIWC
announces Sponsorship of Bus to Northeast Woodworking Show March
24
Long
Island Antique Tool Collectors Club auction on Feb 14.
Seminar:
Chip Carving
|
|
| March 01 |
Program:
Larry Mulderig, CrystaLac
Seminar:
Ian Kirby
Road
Trip: Bus to Northeast Woodworking Show March 24
|
|
| April 01 |
Program:
John White of Fine Woodworking.
|
|
| May 01a |
Program:
Mario Rodriguez - Veneering Basics
Minnesota
Woodworkers Guild Parallels LIWC
|
|
| June01a |
Program:
Annual Picnic
6th
Annual LIWC Wood show
|
|
| |
Program:
Round Robin - No Woodrack Available
|
|
| |
NO
MEETING - SUMMER RECESS
|
|
| September 01p1-2 |
Program:
Mike Daum - Mortising; 2001 Show report
|
|
| October 01 |
Program:
Fred Barrett - Guitar Making
|
|
| November 01(1) |
Program:
Strother Purdy - Tablesaw Snowflake
|
|
| December 01 |
Program:
Toys for Tots and Ernie Conover
|
|
| 2002
|
Jan2002 |
Program:
Round Robin
Freud
Co Truck selling router bits and saw blades in the parking lot.
Mario
Rodriguez offers a course called Restoration - Wood II at FIT.
Bus
to Saratoga Springs Woodworking show planned.
Workshop:
January 26th - Turning
|
|
| February 02 |
Program:
Brian Monks - Mantle Clock
|
|
| March 02 |
Program:
Gene Kelly Plywood Chests.
Shop
Profile - Herb Needleman
|
|
| April 02 |
Program:
Alan Russo of the LI Woodturners Club. |
|
| May 02 |
Program:
Mario
Rodriguez, Mahogany serving tray
Workshop
- Routers |
|
| June02 |
Program:
Annual Picnic
Flag
Case - Joe Bottigliere
Methylene
Chloride Hazards
|
|
| July 02 |
Program:
Round Robin
Member
Profile: Best in Show Winners, Brian and Harry Hinteman.
Mike
Daum - Finishing
Bernie
Hunt - Hand Tools
Road
Trip: Frank Klausz Workshop (planned)
|
|
| August 02 |
Program:
Aime Fraser - Painting and Chemestry
Shop
Review: Rich Macrae
|
|
| September 02 |
Program:
Strother Purdy
Router
Table Fence - Jim Macallum
Shop
Review: Steve Costello
|
|
| October 02 |
Program:
Joanne Campisi - Liberon Products
Grizzly
Tools - Bernie Hunt
|
|
| November 02 |
Program:
Table Saw Setup and Use - Mike Daum
Shop
Vacs - Bernie Hunt
Alain
Tiercy - Nationwide Contest "winner"
|
|
| December 02 |
Program:
Toys for Tots
Grant
Program Proposed by Bob Urso
Shop
Review: Charlie Morehouse
|
|
| 2003
|
January 03 |
Program:
Round Robin
Annual
bus ride to Saratoga announced.
Mac
Simmons Finishing Notebook - Enhancing Grain
Workshop:
Scroll Saw
|
|
| February 03 |
Program:
Ernie Conover - Balance between hand and power tools
Four
Ernie Conover workshops announced: Bandsaw; Turning (2 each);
Routers and Router bits
Book
Review - Making Toys
Mac
Simmons - Pencil Hardness test
|
|
| March 03 |
Program:
Mario Rodriguez - Using yellow glue
Workshop:
Traditional Finishing - Joanne Carnpisi
Saratoga
Bus Trip SOLD OUT! Dues to low turnout a smaller bus had to be
secured.
Connecticut
Valley School of Woodworking review
Carbide
Tip saw evolution
|
|
| April 03 |
Program:
Member Panel discussion
Annual
show April 5 and 6.
Dynamite
Tools article and praise
|
|
| May 03 |
Program:
Norm Roberts of Robert's Plywood
Review
of the Show
|
|
| June03 |
Program:
Annual Picnic
New
Website Look launched
Shop
Review: Bob Heathwood
Article
- Too many Planes? Daryl Rosenblatt
Article
- Safety - Mike Daum
Sunshine
Club "established". Contact Ed Schnepf or Gabe Jaen
|
|
| july 03 |
Program:
Round Robin
Hofstra
University Center - Our next show place.
|
|
| August 03 |
Program:
John Capostoto from Armor Products.
Tool
Review - Felder 12" jointer/planer Daryl Rosenblatt
|
|
| September 03 |
Program:
Delta Products
LIWC
purchases a new projection machine.
Review
of D&D Woodcrafts in PA - Alain Tiercy
2004
LIWC Executive Board Nominations
|
|
| October 03 |
Presentation:
Chris Bender of the Antique Tool Club - Windsor Chairs
Workshop:
Garrett Hack - Slide show; Sharpening and Decorative Details
(Fri/Sat/Sun)
Mike
Daum gets a hair cut
Band
Saw Safety - Mike Daum
Colonial
Williamsburg - Daryl Rosenblatt
|
|
| November 03 |
Program:
Mario Rodriguez - Mitered Dovetail
Making
a Scratch Stock - Jim Maccallum
Easy
Finishing - Color Glazing Blending in the Woods - Mac Simmons
|
|
| December 03 |
Program:
Toys for Tots
New
Executive Board Announced
|
|
| 2004
|
January 04 |
Program:
Round Robin
Thanks
to Gabe Jaen for his tenure.
Workshop:
Shepherd Tool - Infill Hand Planes
Workshop:
Glazing with Mac Simmons
Bent
Nails and Splinters - Steve Eckers
Shop
Review: Garrett Hack
|
|
| February 04 |
Program:
Bent Laminations - Michael Puryear
New
By-Laws accepted
Bent
Nails and Splinters - Steve Eckers
Finishing
Tips - Mac Simmons
Cheaper
by the Dozen - Inexpensive but needed tools - Daryl Rosenblatt
|
|
| March 04 |
Program:
Vacuum in the woodshop; Veneering clamping and lathe chucking
(By members)
Workshop:
Sharpening
Report
on 4H Club Meeting
Bent
Nails and Splinters - Steve Eckers
Cross
Adhesion Test - Mac Simmons
Shop
Review: Rich Weil
|
|
| April 04 |
Program:
Various drawing and drafting techniques
Annual
Woodworking Show
Suggestion
Box talked about. Who can make one?
Bent
Nails and Splinters - Tool Definitions - Steve Eckers
Program:
Toys and Jigs - Joe Bottigliere
Rocking
chairs - Gabe Jaen
New
cutting Tool - Daryl Rosenblatt
A
new Chisel - Daryl Rosenblatt
|
 |
| May 04 |
Program:
Aime Ontario Fraser - Dimensioning Lumber
Review
of the show, which was a great success
|
|
| June04 |
Program:
Annual Picnic
51
rockers given to various charities.
Richard
Weil donates a Suggestion Box
Bent
Nails and Splinters - Steve Eckers
Furniture
Design - Strother Purdy
Dovetails
Anyone (or A place in the Sun) - Rich Macrae
Product
Review MJ Splitter
USDA
Update - Asian Longhorned Beetle Program
|
|
| july 04 |
Program:
Round Robin
Joe
Bottigliere will now handle condolences for members and their
families when necessary.
Saratoga
Show Information
Bent
nails and Splinters - Steve Eckers
Product
Review: Miller Dowel System
Dust
collection Websites - Bill Leonhardt
Book
Review: Tales from the Blue Ox - Daryl Rosenblatt
Inexpensive
Inlay Tools - Daryl Rosenblatt
|
|
| August 04 |
Program:
Collecting Wood - Charles Carter
Member
Profile: John Candito
Bent
Nails and Splinters - Steve Eckers
|
|
| September 04 |
Program:
Alain Tiercy - Scroll Saw work
LIWC
reaches 300 members!
SIG's
are being planned
Groundwork
for our own clubhouse being investigated.
Treasurer's
Report
Bent
Nails and Splinters - Steve Eckers
LIWC
Scrollsaw SIG formed.
Scouting
Again - Gabe Jaen
|
|
| October 04 |
Program:
Strother Purdy - Setting up a workshop
Bent
Nails and Splinters - Steve Eckers
The
Woodrack Bookrack - Kevin Morgan
Workshop:
Lathe workshop
Shop
Review - Chuck Bookbinder
Shop
Review - Richie Zimmerman
Beginner
Classes - Gabe Jaen
Cyclone
Review - Daryl Rosenblatt
|
|
| November 04 |
Program:
Frank Klausz
Workshop:
November 19-21 Marc Adams.
Beginners
group to help novices - Kurt Kietrich
Workshop:
Mantle clock - Gabe Jaen
Bent
Nails and Splinters - Steve Eckers
The
Woodrack Bookrack - Kevin Morgan
Dust
Collection - Daryl Rosenblatt
|
|
| December 04 |
Program:
Toys for Tots
100
Toy Gang a SIG
Bent
Nails and Splinters - Steve Eckers
The
Woodrack Bookrack - Kevin Morgan
A
close Shave - Joe Bottigliere
What
judges look for - Daryl Rosenblatt
First
Letter to the Editor - Richi Weil
|
|
| 2005
|
January 05 |
Program:
Round Robin
The
Mark Adams Weekend (slide Show) - Ed Kelle
Family
Boat Building Day - Tim Donovan
Shop
Review - Matt Stern
Road
Trip - Woodworks show in PA
|
|
| February 05 |
Program
- Electricity in the Workshop
Plane
Shaving Contest Winners - Daryl Rosenblatt
New
Jersey Woodworking Show - Matt Stern
Shop
Review - Steve Gazes
Bent
Nails and Splinters - Steve Eckers
The
Mantle Clock Workshop - Gabe Jaen
Club
History - Brian Haywood
|
|
| March 05 |
Program:
Charlie James - Building a curly maple bed.
Toys
will be donated to the Morgan Center for their silent auction.
Tool
Review: Festool - Daryl Rosenblatt
Safety
- Charlie James
Woodrack
Bookrack - Kitchen Cabinets - Kevin Morgan
|
|
| April 05 |
Road
Trip - Saratoga
Annual
Woodworking Show
Rocking
Horse Silent Auction - Mike Luciano
Bent
Nails and Splinters - Steve Eckers
Members
work Bench - Richard Strickland
Introducing
Spouses to Woodworking - Roger Schroeder
|
|
| May 05 |
Program:
Charlie James - Dovetails
Confessions
of a Wood Show Seminar Junkie - Roger Schroeder
How
thin is thin enough? Joseph Bottigliere and Daryl Rosenblatt.
|
|
| June05 |
Program:
Annual Picnic
Road
Trip: Roberts Plywood
Veneering
Simplified - Roger Schroeder
Hollow
Chisel Mortise Sharpening
Woodrack
Changes - Daryl Rosenblatt
Rigid
Tools given to LIW at last Show
Shop
Review: Todd Jette
Guild
of Long Island Woodturners established
|
|
| july 05 |
Program:
Round Robin
Thanks
from the Morgan Center
The
John Townsend Exhibit: American Joinery at its Best - Roger
Schroeder
PSI
Barracuda Chuck - Bernie Hunt
Scrollsaw
Association of the World - First Place - Steve Gazes Intarsia
Horse
Worth
its Weight in Ebony - Roger Schroeder
|
|
| August 05 |
Program:
Steve Melzer - Carving a shell
Member
Profile Issue - Karen and Joe Saccente - Gabe Jaen
Shop
Talk with Rich Macrae - Roger Schroeder
Connecticut
Historical Society Museum exhibition
|
|
| September 05 |
Program:
Mike Daum Carcase
Jean
Piotrowski's Jewelry Box
Woodrack
distributed via Internet
Road
Trip - Metropolitan Museum of Art
100
Toy Gang article
Shop
Talk with Rich Macrae - Roger Schroeder
|
|
| October 05 |
Program:
CNC Routing
Annual
Elections - Selection of Nominating Committee
Smithtown
Heritage Fair
An
Unhealthy Look at a Woodworker's Best Friend - Roger Schroeder
Dust
Collection Safety - Daryl Rosenblatt
|
|
| November 05 |
Program:
John White Manager of Fine Woodworking Magazine's workshop.
Letter
of thanks - Little Shelter
|
|
| December 05 |
Program:
Toys for Tots
Proposed
Clubhouse - Insurance concerns
Thank
you from The Cancer Center for Kids
The
Steinway Piano Tour - Daryl Rosenblatt
What
is in my shop apron - Mike Daum
|
|
| 2006 |
January 06 |
Program:
Round Robin
Notes
on the Masters Sam Maloff - Daryl Rosenblatt
Where
to find your favorite woods - Roger Schroeder
100
Toy Gang
|
|
| February 06 |
What
do the club members want?
Notes
on Board Meeting
Seminar:
Dovetails
|
|
| March 06 |
Program:
Photographing your Work - Jim Macallum
The
Gamble House - Daryl Rosenblatt
Saratoga
bus trip announced
|
|
| April 06 |
Program:
Frank Klausz
Annual
Show
Shop
Talk with Mike Daum - Roger Schroeder
Member
Reviews: Carter Bandsaw upgrade kit; Circle Jigs; Micro Fence;
Video Review
Letter
of thanks from President Jimmy Carter to Harry Savage.
|
|
| May 06 |
Program:
Show Review
Workshop:
Sharpening
|
|
| June06 |
Program:
Award Certificates from Show
Veneer
bundles raffled off.
LIW
seeks 501C Status
Member
profile: Bill Leonhardt
|
|
| July 06 |
Program:
Round Robin
Happy
birthday to Eliot Silverman, age 90
The
Arthur Schryver Memorial Library
More
shop talk with Mike Daum - Roger Schroeder
Measuring
a Project - Daryl Rosenblatt
Workshop:
Sharpening
|
|
| August 06 |
Program:
Crown Jackson - Crown Moldings
Northeast
Woodworking Network created
Notes
from the Editor - Daryl Rosenblatt
Biography
- Glen D. Huey
Workshop:
Bandsaw
|
|
| September 06 |
Program:
Steve Meltzer - Steinway Piano Company
Last
Issue of Woodrack to be Mailed this month.
Notes
from the Editor - Daryl Rosenblatt
How
to use the Website instructions
|
|
| October 06 |
Program:
Marquetry - Bill Leonhardt
Dedication
of Arthur Schryver Library
Prince
of Peace School requesting help in teaching students hand tool
operation.
Veneer
donated by Steve Meltzer from Steinway Piano auctioned off.
Workshop:
Period Furniture - Glen Huey
Member
Profile - Ed Kelle
Review:
Long Island School of Classical Wood Carving
|
|
| November 06 |
Program:
Dust Collection - Richard Strickland
Tool
Review: The HoverPad - Daryl Rosenblatt
|
|
| December 06 |
Program:
1) Toys for Tots
Program:
2) Burt Lumber - Presentation of various African woods.
Phone
line added for Club Announcements
Going
Pro: Interview with Mike Daum - Matt Stern
|
|
| 2007
|
January 07 |
Program:
Round Robin
Member
Profile: Owen Brady
Steinway
Piano Tour report - Mike Daum
Going
Pro - Joe Saccente - Matt Stern
|
|
| February 07 |
Program:
Joe Saccente - Router Joinery
Prince
of Peace school shows their dovetailing projects
Raising
the Bar - Daryl Rosenblatt
|
|
| March 07 |
Program:
Biscuit Joinery - Dennis Taddeo
Board
Meeting Minutes
Meeting
Coordinator: Matt Stern has been appointed as a non-voting board
member as the Meeting coordinator who will contact participating
members that may be doing presentations, coordinating sound and
video readiness, be part of the program committee and other
details to improve the quality of the monthly meetings. |
|
| April 07 |
Program:
Frank Klausz - Lowboy
Member
profile - Frank Allaire
Tool
Reviews: The Extractor and the Drill Doctor
|
|
| May 07 |
Program:
Panel Discussion
Member
Data Base revision to be done by Steve Blakley
100
Toy Gang donated projects to the Morgan Center, which brought in
# 500.00
Shop
Safety - Daryl Rosenblatt
The
Perfect Finish - Mac Simmons
|
|
| June 07 |
Program:
Annual Picnic (No Rain!)
Workshop:
Finishing
Cabinetmaking
Special Interest Group formed.
Rich
Weil shows CAD drawing for a plaque for the Library.
|
|
| July 07 |
Program:
Round Robin
Special
Interest groups now include: 100 Toy Gang; LI Scrollsawing
Association; Guild of LI Woodturners and Cabinetmakers.
|
|
| August 07 |
Program:
Cut Lists - Richard Strickland
Member
Profile: Barry Saltsberg
Cabinetmakers
SIG officially "Long Island Cabinetmakers"
|
|
| September 07 |
Program:
Carving an Acanthus Leaf - Steve Meltzer
The
Quest for Koa - Mike Daum
Workshop:
Full Scale Drawing - Mike Daum
Smithtown
Heritage Fair
|
|
| October 07 |
Program:
Pete Profeta - Tool Maintenance
Field
Trip: Frank Klausz's Shop
Member
Profile: James J. Roman, aka Ace
LIW
By-Laws presented (in Woodrack)
|
|
| November 07 |
Program:
Rich Macrae - Joinery
Notes
from the Editor - Daryl Rosenblatt
NYCT
Bur Roadeo - LIW members Steve Vattes and Scott Pantano take
first and second places!
By-Laws
Unanimously approved.
|
|
| December 07 |
Program:
Toys for Tots
Website
changes
Frank
Klausz Workshop trip Review
|
|
| 2008 |
January 08 |
Program:
Round Robin
Vijay
Kapur will take over as webmaster
Workshop:
Routers
|
|
| February 08 |
Program:
Dennis Taddeo - Routers
Workshops
announced: Turning, tool repair and maintenance, chip carving
and routing dovetails and other joints with jigs.
Road
Trips announced - Saratoga Springs, Frank Klausz; Roberts Plywood
and Steinway Pianos.
Member
Profiles can be written by anyone and submitted to Daryl
Rosenblatt.
Member
Profile: Adam Fisher
|
|
| March 08 |
Program:
Festool Demo
Discussion
of a wheelchair ramp for a young man in Centereach.
Madison
Square Garden Show
|
|
| April 08 |
Program:
Habitat for Humanity - Les Scheinfeld
Road
Trip: Saratoga Springs
A
Carving SIG is in the process of being formed. A "dress
rehearsal" will be at Steve Blakley's house in March to see
if there is enough interested.
Board
Of Directors Meeting minutes.
The
Rock-it: Joe Bottigliere
Dovetail
Man - Rich Macrae
Website
navigation
|
|
| May 08 |
Program:
A man and his Planes - Pat Healy
Founding
Member Brian Haywood passing. A design for an urn is requested.
|
|
| June08 |
Program:
Annual Picnic
Member
Sam Miller donates wood slabs to LIW
Prince
of Peace school program continues.
NYC
Transit, Department of Buses Steve Vattes and Scott Pantano take
third place in the Bus Roadeo for American Public Transportation
Association.
Peter
Schultheis' segmented turning workshop.
|
|
| July 08 |
Program:
Round Robin
Member
Profile: Peter Shultheis - Segmented Turner
First
meeting of the LIWC Carving SIG.
|
|
| August 08 |
Program:
Charlie James - Using Hide Glue
Show
Discussion
Editors
Note: Daryl Rosenblatt
|
|
| September 08 |
Program:
Frank Klausz - Veneering
Editors
Note: Daryl Rosenblatt
Smithtown
Heritage Fair
|
|
| October 08 |
Program:
Half Size Furniture - Roger Schroeder
LIW
Annual Show
The
Club's donation to the Burn Center auction was well received.
Finishing
Class at the Mark Adams School review (Harry Aristodou)
|
|
| November 08 |
Program:
Barry
and Robert go to the Fair - Barry Saltsburg
A
day at the Presses - Joseph Bottigliere
Joseph
Napoli Jr. showed off and played the new Guitar he made.
|
|
| |
No
Woodrack Available
|
|
| 2009
|
January 09 |
Program:
Round Robin
LIWC
Profiles John Capotosto (Armor Woodworking Supplies)
Board
Meeting Minutes
Book
Review - A splintered History of Wood - Daryl Rosenblatt
|
|
| February 09 |
Program:
Shop Jigs - Charlie James
M.L.
Condon Co. Exotic & Domestic Lumbers
|
|
| March 09 |
Program:
Dewalt presentations
Workshop:
Round Robin of Demonstrations
|
|
| April 09 |
Program:
Brian Monks - Windsor Chairs
Shop
Review: Roger Schroeder
Shop
Review: Bob Barker
Field
Trip - George Nakashima Studio
|
|
| May 09 |
Program:
Strother Purdy on Boxmaking and India
Shop
Review: Steve Price
|
|
| June 09 |
Program:
Annual Picnic
|
|
| July 09 |
Program:
Round Robin
Wooden
you like to Know? Charlie James
Workshop:
Veneering/Inlay
|
|
| August 09 |
Program:
Bill Boxer, Apollo spray guns
Shop
Review: Walter Connolly
|
|
| September 09 |
Program:
Dewalt Porter Cable and Delta presentations
Wooden
you like to Know? Charlie James
Member
Profile: Gary Mahew
Worksharp
Review - Daryl Rosenblatt
Smithtown
Heritage Fair
|
|
| October 09 |
Program:
Frank Klausz
Shop
Review: Bob Urso
James
Krenov - Daryl Rosenblatt
|
|
| November 09 |
Program:
Charlie James - Hand Planes and sharpening
LIW
Annual Show
Prince
of Peace School program continues
|
|
| December 09 |
Program:
Toys for Tots
Review
of Show
Toys
for Tots
|
|
| 2010
|
December 09
December
Links to January
|
Program:
Round Robin
|
|
| February 10 |
Program:
Inlay and other Tricks - Daryl Rosenblatt
Segmented
Bowls - Gary Mayhew will give classes.
Wooden
you like to Know - Charlie James
Smithtown
Historical Society holds a Woodworking demonstration (given by
the LIW)
|
|
| March10 |
Program:
Perfect Prep for Finishing - Mike Daum
Field
Trip: Saratoga
Ward
Melville Heritage Organization asked the clubs help in making
items from a downed Spruce tree.
Executive
Board meetings scheduled at new location.
Pete
Profeta has a Woodmizer and hopes to get it in operation soon.
Wooden
you like to Know - Charlie James
Shop
Review: Joe Vanek
|
|
| April10 |
Program:
Finishing - Charlie Morehouse
Workshop:
Marquetry
Shop
Review: Matt Stern
|
|
| May10 |
Program:
Chair Caning - Steve Price
|
|
| June 10 |
Program:
Annual Picnic
Field
Trip - ML Condon's Lumber
Prince
of Peace school program continues
|
|
| July 10 |
Program:
Round Robin
Extreme
Makeover: Home Edition requested LIW's support for a project in
East Setauket.
|
|
| August10 |
Program:
Panel Discussion
Shop
Review: Daryl Rosenblatt
Review
of Shop visit to M.L. Condon - Charlie James
|
|
| Septembre 10 |
Program:
Frank Klausz - Prepare and glue up projects.
Basic
Band Saw Maintenance - Mike Daum
|
|
| October 10 |
Program:
Allan Breed - Ball and Claw carving
Shop
Review: Christoph Blumrich
Workshop:
Allen Breed
|
|
| November10 |
Program:
Black and Decker Presentation
Field
Trip: Frank Klausz
LIW
Annual Show
Show
and Tell suspended when the LIW has a guest speaker.
|
|
| December10 |
Program:
Toys for Tots
Pictures
of show winners
GALLERY:
The LIW will have it's own Gallery thanks to Bob Schernorf
Computer
problems? Call Bob Urso. (His son just opened a business)
|
|
| 2011 |
January 11
Bad Link ?
|
Program:
Round Robin
|
|
| February 11 |
Program:
Turning - Steve Fulgoni
The
Gallery - Bob Schendorf
The
New Finishers Commandments
Is
there danger in the woods you're working? Mac Simmons
Mike
Daum Meets Martha Stewart
|
|
| March 11 |
Program:
The Tablesaw - Jim Brown
Field
Trip: Saratoga
The
Gallery - Bob Schendorf
|
|
| April 11 |
Program:
Spike Carlsen - A Splintered History of Wood
The
Gallery - Bob Schendorf
Robert
Coles approved as LIW Show Chairman
French
Polishing - Mac Simmons
Shop
Review: Ed Maloney and Mark Suesser
Tool
Review: DeWalt DW611 PK - Matt Stern
|
|
| May 11 |
Program:
Veneering - Charlie James
The
Gallery is now open for business
The
Gallery - Bob Schendorf
Airbrushing
in Color - Mac Simmons
Shop
Review - Corey Tighe
Book
Review: Ridiculously Simple Furniture Projects.
|
|
| June 11 |
Program:
Annual Picnic
The
Gallery - Bob Schendorf
|
|
| July 11 |
Program:
Round Robin
Mike
Daum talks about Facebook as an alternate forum for the website.
|
|
| August 11 |
Program:
Mike Daum on Wood Identification
Notes
from the Editor: Moving the Website to Facebook
The
Gallery - Bob Schendorf
|
|
| September 11 |
Program:
Rich Macrae - Various aspects of Table Construction
Photos
of the Gallery at Bob Schendorf's Huntington Store
|
|
| October11 |
Program:
Walter Roth - Airbrushing
Executive
Board Functions listed
Heritage
Fair Pictures
|
|
| November 11 |
Program:
Steve Meltzer Veneer Repairs
Election
Month
How
this Finish is Done - Marbelizing - Mac Simmons
|
|
December 11 Bad link ?
|
Program:
Toys for Tots
Review
of the Show
Woodrack
devoted to LIW Show 2011
|
|
| 2012
|
January 12 |
Program:
Round Robin
Review
of the Show
Woodrack
devoted to LIW Show 2011
|
|
| |
Program:
20th
Anniversary of the LIW
|
|
| |
Program:
|
|
| |
Program:
|
|
| |
Program:
|
|
| |
Program:
Annual Picnic
|
|
| |
Program:
Round Robin
|
|
| |
Program:
|
|
| |
Program:
|
|
| |
Program:
|
|
| |
Program:
|
|
| |
Program:
|
|
